General Engineer

Qualifications

Education

This position has a positive education requirement: Applicants must submit a copy of their college or university transcripts(s) and certificates by the closing date of announcement to verify qualifications. If selected, an official transcript will be required prior to appointment. You may upload these documents with your application in USAJOBS or fax it to fax number provided in the announcement (please include announcement number on each page).

Failure to do so will result in loss of consideration.

Schools must be accredited by an accrediting institution recognized by the U.S. Department of Education. Accreditation may be verified at the following website: www.ed.gov/accreditation.

Foreign education must be evaluated by a private professional organization specializing in interpretation of foreign education credentials or an accredited U.S. educational institution in terms of equivalence to a degree acquired at an American college or university. A copy of the evaluation results must be included, otherwise your foreign education will not be considered.

Degree: professional engineering. To be acceptable, the curriculum must: (1) be in a school of engineering with at least one curriculum accredited by the Accreditation Board for Engineering and Technology (ABET) as a professional engineering curriculum; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR

Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying professional engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

• Professional registration -- Current registration as a professional engineer by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.

• Written Test-- Evidence of having successfully passed the Engineer-in-Training (EIT) examination, or the written test required for professional registration, which is administered by the Boards of Engineering Examiners in the various States, the District of Columbia, Guam, and Puerto Rico.

  Applicants who have passed the EIT examination and have completed all the requirements for either (a) a bachelor's degree in engineering technology (BET) from an accredited college of university that included 60 semester hours of courses in the physical, mathematical, and engineering sciences, or (b) a BET from a program accredited by the Accreditation Board for Engineering and Technology (ABET) may be rated eligible for certain engineering positions at GS-5. Eligibility is limited to positions that are within or closely related to the specialty field of the engineering technology program. Applicants for positions that involve highly technical research, development, or similar functions requiring an advanced level of competence in basic science must meet the basic requirements in paragraph A.

  Because of the diversity in kind and quality of BET programs, graduates of other BET programs are required to complete at least 1 year of additional education or highly technical work experience of such nature as to provide reasonable assurance of the possession of the knowledge, skills, and abilities required for professional engineering competence. The adequacy of this background must be demonstrated by passing the EIT examination.

• Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements. The courses must be fully acceptable toward meeting the requirements of a professional engineering curriculum as described in paragraph A.

• Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in engineering technology or in an appropriate professional field, e.g., physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)

• Foreign Education: For additional information, visit: http://www.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html
• Foreign Education: For additional information, visit: http://www.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html

You will be evaluated for this job based on how well you meet the qualifications above.

IMPORTANT: Applicants may be rated on the extent and quality of experience, education, and training relevant to the duties of the position(s). All answers provided in the on-line process must be substantiated. Ensure that your application package/resume supports your responses.

ALL applicants MUST submit the following:

(1) resume with complete work history; and

(2) a copy of your most recent SF-50 (Notification of Personnel Action).

For guidance on how to create a Federal resume, visit http://www.archives.gov/careers/jobs/forms/resume-guide.pdf.

Failure to submit all required documents by the closing date will result in a finding of ineligible. We are not responsible for incomplete, illegible or missing documents.

Please DO NOT email your application documents. We cannot accept documents received via the email system. Documents sent via email will NOT receive consideration.

Applicants claiming eligibility for the Expanded Veterans Hiring Opportunity (EVHO), MUST submit a DD Form 214 reflecting character of service to verify eligibility by the closing date of the announcement as requested by the Human Resource Office. Eligibility for EVHO will be considered based on applicable documentation submitted by the closing date.
This position has a positive education requirement; college transcripts are required for ALL candidates newly appointed to the FAA in the 0800 (Engineering) series.

College transcripts must be submitted from current FAA employees applying for internal vacancies if they have never held a position in the 0800 (Engineering) series with the FAA.

College transcripts are not required from current FAA employees who are currently occupying an 0800 (Engineering) series.

If selected, official transcripts are required prior to employment.

If you are a current or former Federal employee (including a current FAA employee), you MUST provide a copy of your SF-50 (Notification of Personnel Action) containing information in Blocks 15, 17, 18, 19, 22, and 24 so it can be used to verify your position title, series, grade, tenure, and organization of record by the closing date of the announcement. You may fax your SF-50 or upload it into the on-line application. If faxing the SF-50, please ensure you include the vacancy announcement number on the faxed copy.

If you are a current Federal employee and need a current copy of your SF-50, please contact your personnel office. If you are an FAA employee, you can access and print your SF-50 from the eOPF system https://eopf.opm.gov/dot/. If you are a former Federal employee, you can obtain a copy of your SF-50 by writing the National Personnel Records Center Annex, 1411 Boulder Boulevard, Valmeyer, IL 62295. Additional information is available from this link: https://www.archives.gov/st-louis/opf.

Expanded Veterans Hiring Opportunity (EVHO) are preference eligibles and veterans who are honorably discharged from the Armed Forces after completing at least three (3) years of continuous active service. Applicants claiming eligibility for EVHO, MUST submit a DD Form 214 reflecting character of service to verify eligibility by the closing date of the announcement as requested by the Human Resource Office. Eligibility for EVHO will be considered based on applicable documentation submitted by the closing date.