Electrical Engineer

Federal Aviation Administration •

Hampton, Georgia, United States

Position Type: Contractor

Job Description:

Performs multiple, varying, and complex assignments and plans the implementation of projects/programs under limited direction of a manager, project/program manager, or more experienced engineer.

Duties

Designs, reviews and manages generally
for building and electronic facility electrical engineering projects including power panels, electrical buss, UPS, engine generators, standby battery systems, lighting systems and/or grounding work for new and remodel work. The work also includes the responsibility for planning, developing, and overseeing small projects to establish and improve facilities/systems including preparation of engineering plans, specification and documents for construction and/or installation of facilities and equipment.

Applies experience and advanced knowledge of engineering principles, theories, and concepts applicable to his/her discipline to plan and accomplish assignments. He/she uses experience and knowledge of the Uniform Building Code (UBC), International Building Code (IBC), the National Electrical code, the National Environmental Policy Act (NEPA) Lighting Protection Code, and the Institute of Electrical and Electronics Engineers (IEEE) Grounding Standards for electronic facilities to complete complex assignments. He/she assures that assigned projects comply with applicable building codes and standards, including FAA Orders and directives and is required to interact with personnel from other sections, field offices, private sector contractors, and other local and Federal government agencies.

Conducts site surveys and site adaptation of standard engineering designs, including developing and coordinating project scope, cost estimate, facility and NAS risk mitigation, RTP schedule, resource requirements, and project closeout for assigned projects. Established policies/procedures provide guidance for most assignments, but allow considerable discretion to select the most appropriate approach or to recommend new approaches. He/she estimates, manages, and accounts for funding of assigned projects. Initiates, modifies, and assesses task orders/work releases/contracts with engineering support contractors such as TSSC, NISC, A/Es, and others in response to changes in scope, performance and cost. Identifies and informs management of problems that require their attention. Often develops and recommends techniques to address problem situations. Performs the full range of construction and/or installation activities including the conduct of daily operations, overall schedule reviews, drawing approvals; project coordination, safety and environmental requirements, and interfacing with Logistics on contract award, contract modifications and material acquisitions. Uses experience of a COR/TOR for implementation construction and installation activities.

Work is reviewed periodically, typically at major milestones and at completion, for technical compliance and alignment with the requirements of the project or other work activity.

Job Requirements:
Requirements Conditions of Employment

US Citizenship is required.
Selective Service Registration is required for males born after 12/31/1959.
Must submit an SF50 (See Required Documents).
This position has a positive education requirement. Transcript(s) required.

Qualifications

OPMs, Individual Occupational Requirements (IOR) for professional engineering positions in conjunction with the Group Qualification Standard for Professional & Scientific Positions.

(A) Degree: Professional Engineering. To be acceptable, curriculum must: (1) be in a school of engineering with at least one curriculum accredited by the Accreditation Board for Engineering and Technology (ABET) as a professional engineering curriculum; OR (2) include differential AND integral calculus and courses (more advanced than first-year physics & chemistry) in FIVE of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature & properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR;

Combination of Education & Experience - College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical & mathematical sciences underlying professional engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1) Professional Registration - Current registration as a professional engineer by any State, the District of Columbia, Guam, or Puerto Rico.

2) Written Test - Evidence of having successfully passed the Engineer-in-Training (EIT) examination, or the written test required for the professional registration which is administered by the Boards of Engineering Examiners in the various States, the District of Columbia, Guam, and Puerto Rico.

3) Specified Academic Courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements. The courses must be fully acceptable toward meeting the requirements of a professional engineering curriculum as described in paragraph “A” above.

4) Related Curriculum - Successful completion of a curriculum leading to a bachelor's degree in engineering technology or in an appropriate professional field, e.g., physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g. in interdisciplinary positions. (The above examples of curricula are not all-inclusive).

IN ADDITION TO THE ABOVE BASIC REQUIREMENT:

To qualify for this position at the FV-I level, you must demonstrate in your application that you possess at least one year of specialized experience equivalent to the FG/GS-12. Specialized experience is experience that has equipped you with the particular knowledge, skills, and abilities to perform successfully the duties of the position.

Specialized experience is:

Experience conveying technical engineering information to a variety of audiences

Eligible candidates will be ranked based on Knowledge, Skills and Abilities (KSA), if applicable. In addition to the above, this position also has a Quality Ranking Factor (QRF). Applicants meeting the minimum response level to the QRF will be placed in a Well Qualified category. This QRF may be found in the KSA section of this vacancy.

Applicants should provide examples of Specialized Experience in their Work History.

Qualifications must be met by the closing date of the announcement.

Education

This position has a positive education requirement: Applicants must submit a copy of their college or university transcripts(s) and certificates by the closing date of announcement to verify qualifications. If selected, an official transcript will be required prior to appointment. You may upload these documents with your application in USAJOBS or fax it to fax number provided in the announcement (please include announcement number on each page).

Failure to do so will result in loss of consideration.

Schools must be accredited by an accrediting institution recognized by the U.S. Department of Education. Accreditation may be verified at the following website: www.ed.gov/accreditation.

Foreign education must be evaluated by a private professional organization specializing in interpretation of foreign education credentials or an accredited U.S. educational institution in terms of equivalence to a degree acquired at an American college or university. A copy of the evaluation results must be included, otherwise your foreign education will not be considered.

How You Will Be Evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

IMPORTANT: Applicants may be rated on the extent and quality of experience, education, and training relevant to the duties of the position(s). All answers provided in the on-line process must be substantiated. Ensure that your application package/resume supports your responses.

Required Documents

Current or Former Federal employees: You MUST submit a copy of your most recent (non-award) SF-50, Notification of Personnel Action, that verifies your position title, series, grade, tenure, and organization of record. Required documents may be uploaded to your AVIATOR application, emailed to the Agency contact, or faxed on or before the closing date of the announcement. Failure to provide the required documentation by the closing date of this announcement will result in non-consideration for this position.

Applicants claiming eligibility for the Expanded Veterans Hiring Opportunity (EVHO), MUST submit a DD Form 214 reflecting character of service to verify eligibility by the closing date of the announcement as requested by the Human Resource Office. Eligibility for EVHO will be considered based on applicable documentation submitted by the closing date.
This position has a positive education requirement; college transcripts are required for ALL candidates newly appointed to the FAA in the 0800 (Engineering) series.

College transcripts must be submitted from current FAA employees applying for internal vacancies if they have never held a position in the 0800 (Engineering) series with the FAA.

College transcripts are not required from current FAA employees who are currently occupying an 0800 (Engineering) series.

If selected, official transcripts are required prior to employment.

If you are a current or former Federal employee (including a current FAA employee), you MUST provide a copy of your SF-50 (Notification of Personnel Action) containing information in Blocks 15, 17, 18, 19, 22, and 24 so it can be used to verify your position title, series, grade, tenure, and organization of record by the closing date of the announcement. You may fax your SF-50 or upload it into the on-line application. If faxing the SF-50, please ensure you include the vacancy announcement number on the faxed copy.

If you are a current Federal employee and need a current copy of your SF-50, please contact your personnel office. If you are an FAA employee, you can access and print your SF-50 from the eOPF system https://eopf.opm.gov/dot/. If you are a former Federal employee, you can obtain a copy of your SF-50 by writing the National Personnel Records Center Annex, 1411 Boulder Boulevard, Valmeyer, IL 62295. Additional information is available from this link: https://www.archives.gov/st-louis/opf.

Expanded Veterans Hiring Opportunity (EVHO) are preference eligibles and veterans who are honorably discharged from the Armed Forces after completing at least three (3) years of continuous active service. Applicants claiming eligibility for EVHO, MUST submit a DD Form 214 reflecting character of service to verify eligibility by the closing date of the announcement as requested by the Human Resource Office. Eligibility for EVHO will be considered based on applicable documentation submitted by the closing date.

If you are relying on your education to meet qualification requirements:

Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education.

Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.

Salary Range: $92,964 - $144,081

Job Ident #: 819549800

(Job and company information not to be copied, shared, scraped, or otherwise disseminated/distributed without explicit consent of JSfirm, LLC)

Electrical Engineer

Company Overview